Enabling Telepresence Mode - Polycom RealPresence 4000 Administrator's Manual

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide

Enabling Telepresence Mode

Conference Level
Telepresence Mode must be configured in a new or existing Conference Profile.
To enable Telepresence in a new or existing Conference Profile:
1
2
3
4
5
4-60
In the RMX Management pane, click Conference Profiles.
Click the New Profiles (
Define the various profile General, Advanced, Gathering Settings and Video Quality
parameters.
For more information on defining Profiles, see "Defining New Profiles" on page 2-27.
Click the Video Settings tab.
In the Telepresence Mode field, select one of the following options:
— OFF - When OFF is selected, normal conference video is sent by the RMX.
— AUTO (Default) - The ITP features are dynamic. When AUTO is selected and an
ITP endpoint is detected, ITP features are applied to the conference video for all
participants. If all ITP endpoints disconnect from the conference, normal
conference video is resumed for all remaining participants. ITP features are re-
applied for all participants should an ITP endpoint re-connect to the conference.
When Telepresence Mode is set to Auto and a one-screen Telepresence unit is in use,
the RMX controls layouts instead of the MLA. For more information see Polycom
Multipoint Layout Application (MLA) User's Guide for Use with Polycom Telepresence
Solutions.
) button or open an existing Conference Profile.
Polycom, Inc.