Hw Monitor Pane Toolbar - Polycom RealPresence 4000 Administrator's Manual

HW Monitor Pane Toolbar

The following buttons appear in the tool bar of the Hardware Monitor:
Table 24-2
Button
Viewing the Properties of RealPresence Collaboration
Server (RMX) 1500 Hardware Components
The properties displayed for the hardware components will vary according to the type of
component viewed. These component properties can be grouped as follows:
•
•
•
No properties are provided for Power Supply (PWR). For more information, see the RealPresence
Collaboration Server (RMX) 1500 Hardware Guide, "RMX 1500 Power Supply" on page 1-20.
Polycom, Inc.
HW Monitor Pane Tool Bar Buttons
Name
System Reset
System Shut Down
System Start Up
Shelf Manager
Logger Mode
MCU Properties (RealPresence Collaboration Server (RMX) 1500)
Card Properties (MPMx, CPU, RTM IP, RTM ISDN)
Supporting Hardware Components Properties (Backplane, FANS, LAN)
— The Hardware Properties dialog box has the following structure:
Description
Resets and restarts the system. Resetting saves settings and
information that you changed in the system, i.e. IP Services,
etc...
Shuts down the system into a standby mode. When the user in
the RMX Manager/Client presses the System Shut Down (red)
button in the Hardware Monitor tool bar, the system should
enter a standby mode and the LED turns ON. Only the media
and control unit cards are in a standby mode. Shelf Manager
remains active.
Turn the system OFF/ON to exit the standby mode.
Starts up the system.
Note: This button is only displayed when connecting directly to
the Shelf Management server.
In the HW Monitor this opens the Shelf Management login
window.
In the Shelf Management HW Monitor this sets the MFA, CPU
and Switch (Cards: MPM/MPM+/MPMx, CNTL and RTM IP)
into diagnostic mode. For more information, see "Diagnostic
Mode (RealPresence Collaboration Server (RMX) 1500/2000/
4000)" on page 24-22.
Diagnostics Tests selection and Tests monitoring.
Note: This button is only displayed when connecting directly to
the Shelf Management server and logged in as a special
support user.
Chapter 24-RMX Hardware Monitoring
24-3