Starting A Conferencing Call From The Moc - Polycom RealPresence 4000 Administrator's Manual

Starting a Conferencing Call from the MOC

1
2
3
Setting Simultaneous Numerical Dialing and Matched URI Routing
You can simultaneously set up an RMX for both numerical and Matched URI dialing. If you
want to do this, follow these instructions:
1
2
•
•
Polycom, Inc.
In the Office Communicator application, enter the number to dial, for example, 113344.
This number is composed of the RMX Prefix in the Gatekeeper (for example, 11) and the
Meeting Room ID, as defined on the RMX (for example, 3344).
Click Call, and then click Other.
The call is routed to the Meeting Room on the RMX, and the caller that initiated the call
connects as the conference chairperson.
The MOC User can then add video to the call, by selecting Add Video in the Office
Communicator window.
Set the RMX as a trusted service (MediationServer) and a voice gateway using the
instructions in "Setting the Numerical Dialing Method" on page
Set up a matching URI route to the RMX/DMA by right-clicking the OCS Pool,
selecting Properties > Front End Properties > Routing Tab and follow the instructions
in "Setting the Static Route for RMX in the OCS" on page H-9.
When defining both routing methods, you cannot add an RMX as an Authorized Host using the
Front End Properties > Host Authorization tab. There can only be one trusted service entry
for the RMX even though there are two different routes to the RMX (i.e., Matched URI and
numerical dialing). If the Matched URI routing method was previously defined and the RMX was
set as trusted host, and you are adding the numerical dialing method, you have to remove the
RMX from the Trusted Hosts list. For more details, see "Optional. Removing the RMX from the
Host Authorization List" on page H-13.
Only TLS connections to the RMX will work, TCP connections will not work.
Appendix H-Setting the RMX for Integration Into Microsoft Environment
H-12.
H-21