Enabling And Configuring 802.1X Authentication - Polycom RealPresence 4000 Administrator's Manual

Enabling and Configuring 802.1X Authentication

802.1X Authentication for each NIC is enabled or disabled in the Setup > Ethernet Settings
dialog box. The following additional table columns are used to modify these parameters:
•
•
•
Modify the Ethernet Settings table fields as set out in Table 23-12:
Table 23-12
Field
802.1x Authentication
User Name
Password
(EAP-MD5, PEAPv0 and
MSCHAPv2 only)
Polycom, Inc.
802.1X Authentication
User Name
Password
802.1X Authentication - Configuration
For each NIC, click the arrow to open the drop-down menu and
select (or disable) the 802.1X Authentication method:
•
Off
•
EAP-MD5
•
EAP-TLS
•
PEAPv0
•
MSCHAPv2
Enter the User name that the RMX will use to register with the
802.1X Authentication Server. This must be the RMX's DNS name
and can be up to 256 characters.
Note: If the Domain Name (DC) field was completed in the
Certificate Request, the User must be:
<Common Name (DNS)>@<Domain Name (DC)> as set out in
the Certificate Request.
Enter the Password, that the RMX will use to register with the
802.1X Authentication Server. Up to 256 Unicode characters can
be used.
The Password is always displayed as four asterisks.
Chapter 23-Ultra Secure Mode
Description
23-45