Polycom RealPresence 4000 Administrator's Manual page 756

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide
22-26
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag
ENABLE_SELECTIVE_MIXI
NG
ENABLE_SIP_PEOPLE_PLU
S_CONTENT
ENABLE_SIP_PPC_FOR_AL
L_USER_AGENT
ENABLE_SIRENLPR
ENABLE_SIRENLPR_SIP_E
NCRYPTION
ENABLE_TC_PACKAGE
ENABLE_TEXTUAL_CONFE
RENCE_STATUS
ENABLE_VIDEO_PREVIEW
EXTERNAL_CONTENT_
DIRECTORY
Description
Enables (default) or disables the Automatic muting of noisy
AVC endpoints. For more details, see "Permanent
Conference" on page 3-41.
When set to YES, the automatic muting of noisy endpoints
can be enabled or disabled at the conference level in the
Conference Profile - Audio Settings dialog box.
When set to NO, the automatic muting of noisy endpoints is
disabled at the conference level and cannot be enabled in the
Conference Profile - Audio Settings dialog box.
Default: YES
Note: MCU reset is not required when changing the flag
value.
If security is of higher priority than SIP Content sharing, SIP
People+Content can be disabled by setting this System Flag
to NO. (The content management control (BFCP) utilizes an
unsecured channel (60002/TCP) even when SIP TLS is
enabled.)
Default: YES
When set to YES, SIP People+Content and BFCP capabilities
are declared with all vendors' endpoints.
Default: YES
Range: YES / NO
Enable / disable SirenLPR Audio Algorithm for use in IP
(H.323, SIP) calls in both CP and VSW conferences.
Range: YES / NO
Default: YES
Enables the SirenLPR audio algorithm when using encryption
with the SIP protocol.
Range: YES / NO
Default: NO
Enables or disables Network Traffic Control.
Range: YES / NO
Default: NO
Set the value of this flag to NO to disable Text Indication. This
setting is recommended for MCUs running Telepresence
conferences.
Default: YES.
Enables the Video Preview feature.
Default: YES.
For more details, see "Video Preview (AVC Only Participants)"
on page 3-15.
The Web Server folder name. Change this name if you have
changed the default names used by the CMA/XMA
application.
Default: /PlcmWebServices
Polycom, Inc.