Defining The Snmp Parameters In The Rmx - Polycom RealPresence 4000 Administrator's Manual

Table 21-16
Key
5001

Defining the SNMP Parameters in the RMX

The SNMP option is enabled via the RMX Web Client application.
The addresses of the Managers monitoring the MCU and other security information are
defined in the RMX Web Client application and are saved on the MCU's hard disk. Only
users defined as Administrator can define or modify the SNMP security parameters in the
RMX Web Client application.
To enable SNMP option:
1
2
3
4
Polycom, Inc.
SNMP MIB entities that do not generate traps (Continued)
Description
License not found
In the RMX Web Client menu bar, click Setup > SNMP.
The RMX-SNMP Properties - Agent dialog box is displayed.
This dialog box is used to define the basic information for this MCU that will be used by
the SNMP system to identify it.
In the Agent dialog box, click the SNMP Enabled check box.
Click the Retrieve MIB Files button to obtain a file that lists the MIBs that define the
properties of the object being managed.
The Retrieve MIB Files dialog box is displayed.
Click the Browse button and navigate to the desired directory to save the MIB files.
Chapter 21-RMX Administration and Utilities
Comment
Not in use
(Product
activation
failure is
trapped)
21-37