Starting The Rmx Manager Application - Polycom RealPresence 4000 Administrator's Manual

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide

Starting the RMX Manager Application

Once installed, the RMX Manager can be run using the
(secured) command in the browser's address line or the Windows Start menu.
To use the browser:
1
2
To use the Windows Start menu:
1
20-4
The installation proceeds.
The installation completes, the application loads and the RMX Manager - MCUs screen
is displayed.
MCUs Toolbar
MCUs Pane
The first time you start the RMX Manager application, the MCUs pane is empty.
In the browser's command line, enter:
http://<MCU Control Unit IP Address>/RMXManager.html
or
https://<MCU Control Unit IP Address>/RMXManager.html
Press Enter.
Click Start > Programs.
If the RMX Manager is displayed in the recently used programs list, click RMX
a
Manager in the list to start the application.
or
Click All Programs > Polycom > RMX Manager.
b
(non-secured) or
http:// https://
Polycom, Inc.