Enabling, Disabling And Modifying The White List - Polycom RealPresence 4000 Administrator's Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide

Enabling, Disabling and Modifying the White List

The use of White List in the environment can be enabled or disabled in the Management
Network Service - White List dialog box.
To enable, disable, view or modify the White List:
1
2
3
4
5
23-48
In the RMX Management pane, click the IP Network Services.
The IP Network Services pane is displayed.
In the IP Network Services list pane, double-click the Management Network entry.
The Management Network dialog box is displayed.
Click the WhiteList tab.
The WhiteList dialog box is displayed.
— If there are no entries in the White List, it is disabled to prevent lock out.
— If the White List is disabled none of the IP addresses in the list are displayed.
— The Add and Remove buttons are only active if the Enable Whitelist check box is
selected.
Select the Enable Whitelist check box.
All IP addresses in the list are displayed and the Add and Remove buttons become
active.
Modify the White List.
Polycom, Inc.