Polycom RealPresence 4000 Administrator's Manual page 312

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide
8-10
Table 8-3 New Participant – General Properties (Continued)
Field
IP Address
(H.323 and SIP Only)
Phone Number
(ISDN/PSTN Only)
Alias Name/Type
(H.323 Only)
Description
Enter the IP address of the participant's endpoint.
•
For H.323 participant define either the endpoint IP address or
alias.
•
For SIP participant define either the endpoint IP address or the
SIP address.
For RMXs registered to a gatekeeper, the RMX can be configured to
dial and receive calls to and from H.323 endpoints using the IP
address in the event that the Gatekeeper is not functioning. For more
information, see "Gateway Calls" on page 19-1.
Note: This field is hidden when the ISDN/PSTN protocol is selected.
Enter the phone number of the ISDN/PSTN participant.
Note: This field is only displayed when the ISDN/PSTN protocol is
selected.
If you are using the endpoint's alias and not the IP address, first
select the type of alias and then enter the endpoint's alias:
•
H.323 ID (alphanumeric ID)
•
E.164 (digits 0-9, * and #)
•
Email ID (email address format,
e.g. abc@example.com)
•
Participant Number (digits 0-9, * and #)
Notes:
•
Although all types are supported, the type of alias is dependent on
the gatekeeper's capabilities. The most commonly supported alias
types are H.323 ID and E.164.
•
This field is used to enter the Entry Queue ID, target Conference
ID and Conference Password when defining a cascaded link.
•
Use of the E.164 Number is dependent on the setting of the
REMOVE_IP_IF_NUMBER_EXISTS System Flag. For more
information see "Substituting E.164 Number in Dial String" on
page 8-14.
•
This field is removed from the dialog box when the ISDN/PSTN
protocol is selected.
Polycom, Inc.