Polycom RealPresence 4000 Administrator's Manual page 685

10 Define the following parameters:
11 Click the Add button to add a new Manager terminal.
Polycom, Inc.
Table 21-18 SNMPv3 - Traps
Field
SNMP Trap Version
Trap Destination
Description
Specifies the version, either Version 1 2 or 3 of the traps being sent to
the IP Host. Polycom software supports the standard SNMP version 1
and 2 traps, which are taken from RFC 1215, convention for defining
traps for use with SNMP.
Note: The SNMP Trap Version parameters must be defined
identically in the external SNMP application.
This box lists the currently defined IP addresses of the Manager
terminals to which the message (trap) is sent.
IP Enter the IP address of the SNMP
trap recipient.
Community Enter the Community Name of the
Name manager terminal used to monitor
the MCU activity
User Name Enter the name of the user who is to
have access to the trap.
Authentication Enter the authentication protocol:
Protocol MD5 or SHA.
Privacy Enter the privacy protocol: DES or
Protocol AES.
Engine ID Enter an Engine ID to be used for
both the Agent and the Trap.
Default: Empty
Chapter 21-RMX Administration and Utilities
All
Versions
Version 1
and
Version 2
Version 3
21-39