Enabling As-Sip Content - Polycom RealPresence 4000 Administrator's Manual

Hide thumbs Also See for RealPresence 4000:

Table of Contents

RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide

Enabling AS-SIP Content

AS-SIP Content is enabled in the New Profile / Profile Properties - Video Quality tab.

When the AS-SIP Content check box is selected the following are automatically enabled and

cannot be disabled:

The time that the RMX waits for endpoints to respond to its SDP Re-invite is determined by

a timer. The timer duration, in seconds, is controlled by the AS_SIP_CONTENT_TIMER

System Flag. Its default value is 10 seconds. To modify the timer value, manually add this

flag to system.cfg and modifying its value as required:

Range: 1 - 60 seconds. (Values outside this range are rejected and an error message is

An endpoint connecting after Content started and was stopped will receive the SDP Re-

invite and the content media line only after a new Content request is sent.

Once Content has been initiated by one of the endpoints, the Content channel will be

opened to all endpoints and remain open even if the Content sharing endpoint stops

sharing Content.

Send Content to Legacy Endpoints

Multiple Resolutions

Polycom, Inc.

Do you have a question about the RealPresence 4000 and is the answer not in the manual?

Realpresence 1500 Realpresence 2000