Sending Content To Legacy Endpoints In Telepresence Mode - Polycom RealPresence 4000 Administrator's Manual

4
5
For flag changes (including deletion) to take effect, reset the MCU. For more information see
"Resetting the Collaboration Server (RMX)" on page 21-77.

Sending Content to Legacy Endpoints in Telepresence Mode

The RMX can be configured to manage the layouts of to H.323/SIP/ISDN endpoints that do
not support H.239 Content (legacy endpoints) over the video (people) channel in
Telepresence conferences when Content is being sent.
For more information, see "Sending Content to Legacy Endpoints in Telepresence Conferences" on
page
Exclusive Content Mode
Exclusive Content Mode allows you to limit Content broadcasting to one participant, preventing
other participants from interrupting the Content broadcasting while it is active.
Guidelines
•
Polycom, Inc.
Table 4-9 LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag Values (Continued)
Layout Flag Value
CP_LAYOUT_1P8HOR_UP
CP_LAYOUT_3X3
CP_LAYOUT_2P8
CP_LAYOUT_1P12
CP_LAYOUT_4X4
Click OK.
The flag is updated in the
Click OK.
4-61
Exclusive Content Mode is available in all Conferencing Modes.
MCMS_PARAMETERS list.
Chapter 4-Additional Conferencing Information
4-25