Polycom RealPresence 4000 Administrator's Manual page 1023

CSR Method - Sending the certificate
After you have received the certificate from the Certificate Authority:
If you have closed the IP Network Service - SIP Servers dialog box, repeat steps 1 to 11 in the
procedure "Defining a SIP Network Service in the RMX and Installing the Security Certificate" on
page H-38.
19 Open the Certificate Authority e-mail and Copy (Ctrl + C) the certificate information
20 In the IP Network Service - SIP Servers dialog box, click the Send Certificate button.
21 Click Paste Certificate to paste the clipboard content into the Send Certificate dialog box.
22 Click the Send Certificate button to send the certificate to the RMX.
23 Click the Close button.
24 In the IP Network Service - SIP Servers dialog box, complete the SIP Servers definitions.
25 Click OK.
Polycom, Inc.
from the Certificate Authority's e-mail to the clipboard.
The Send Certificate dialog box opens.
The MCU validates the certificate.
— If the certificate is not valid, an error message is displayed.
Appendix H-Setting the RMX for Integration Into Microsoft Environment
H-43