Connection To The Entry Queue - Polycom RealPresence 4000 Administrator's Manual

Connection to the Entry Queue

An undefined participant connecting to an Entry Queue inherits the encryption
characteristics of the Entry Queue as defined in the Entry Queue's profile.
Participants can be moved from the Entry Queue and the destination conference if both
conferencing entities have the same Profile settings, i.e. from SVC Only Entry Queue to SVC
Only conference and from mixed CP and SVC Entry Queue to a mixed CP and SVC
conference, etc.
Table 4-11 summarizes the connection possibilities for a participant that is to be moved from
an Entry Queue to a destination conference for each of the conference Profile and Entry
Queue encryption options.
Table 4-11
Entry Queue
Encryption Setting
No Encryption
Encrypt All
Encrypt When
Possible
*
System Flag = FORCE_ENCRYPTION_FOR_UNDEFINED_PARTICIPANT_IN_WHEN_AVAILABLE_MODE
Moving from the Entry Queue to Conferences or Between Conferences
Participants can be moved from the Entry Queue and the destination conference if both
conferencing entities have the same Profile settings, i.e. from SVC Only Entry Queue to SVC
Only conference and from mixed CP and SVC Entry Queue to a mixed CP and SVC
conference, etc.
Polycom, Inc.
Connection of Undefined Participants to the Entry Queue Based on the Encryption
Settings
Undefined Participant Connection to the Entry Queue
*Flag = No
Connected, non-encrypted
(Encryption is not declared by the
RMX, therefore endpoint does not
use encryption)
Connected only if encrypted.
Non-encrypted endpoints are
disconnected
Connected encrypted - Endpoints
with encryption capabilities.
Connected non-encrypted -
endpoints without encryption
capabilities
Chapter 4-Additional Conferencing Information
*Flag = YES
Connected, non-encrypted
(Encryption is not declared by the
RMX, therefore endpoint does not
use encryption)
Connected only if encrypted.
Non-encrypted endpoints are
disconnected
Connected only if encrypted.
Non-encrypted endpoints are
disconnected.
4-43