Polycom RealPresence 4000 Administrator's Manual page 767

Polycom, Inc.
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag
RTCP_FLOW_CONTROL_T
MMBR_ENABLE
RTCP_FLOW_CONTROL_T
MMBR_INTERVAL
RTCP_PLI_ENABLE
RTCP_QOS_IS_EQUAL_TO
_RTP
SELF_IND_LOCATION
SEND_SIP_BUSY_UPON_R
ESOURCE_THRESHOLD
Description
Enables/disables the SIP RTCP flow control parameter.
Default: YES
Modifies the interval (in seconds) of the TMMBR (Temporary
Maximum Media Stream Bit Rate) parameter for SIP RTCP
flow control.
Range: 5 - 999 (seconds)
Default: 180
When set to YES, the (Picture Loss Indication (PLI) is sent as
INFO (and not RTCP).
Default = YES
Range: YES/NO
Default: YES
Change the location of the display of the Network Quality
Indicator of the participant's own endpoint.
Default: BOTTOM_RIGHT
Range:
•
TOP_ LEFT
•
TOP
•
TOP_RIGHT
•
BOTTOM_ LEFT
•
BOTTOM
•
BOTTOM_RIGHT
When set to YES, it enables the RMX to send a busy
notification to a SIP audio endpoint or a SIP device when
dialing in to the RMX whose audio resource usage exceeded
the Port Usage threshold.
When set to NO, the system does limit the SIP audio endpoint
connections to a certain capacity and will not send a busy
notification when the resource capacity threshold is
exceeded.
Default: NO
Chapter 22-System Configuration Flags
22-37