Manually Adding And Deleting System Flags - Polycom RealPresence 4000 Administrator's Manual

Manually Adding and Deleting System Flags

To add a flag:
1
2
3
Polycom, Inc.
In the System Flags dialog box, click the New Flag (
The New Flag dialog box is displayed.
In the New Flag field enter the flag name.
In the Value field enter the flag value.
The following flags can be manually added to the
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS
Flag
802_1X_CERTIFICATE_MO
DE
802_1X_SKIP_CERTIFICAT
E_VALIDATION
802_FIPS_MODE
MCMS_PARAMETERS tab
Description
Determines whether one TLS certificate is retrieved from the
Certificate Repository for all IP services or if multiple
certificates will be retrieved, one for each IP service. For more
information, see "IEEE 802.1x Authentication" on page 23-42.
Range: ONE_CERTIFICATE, MULTIPLE_CERTIFICATE
Default: ONE_CERTIFICATE.
If the flag value is:
• YES - The retrieved certificate is not validated against theCA
certificate.
• NO - The retrieved certificate is validated against the CA
certificate. Validation failure raises an Active Alarm and is
reported in the Ethernet Monitoring dialog box.
For more information, see "IEEE 802.1x Authentication" on
page 23-42.
Range: YES, NO
Default: YES
If the flag value is YES, the availability of the MD5
Authentication Protocol will neither be displayed as selectable
option nor supported.
For more information, see "IEEE 802.1x Authentication" on
page 23-42.
Range: YES/NO.
Default: NO
Chapter 22-System Configuration Flags
) button.
:
22-19