Create Configuration - Ag Leader Integra Display Operator's Manual

A
PPLICATION
NORAC UC5
N U
ORAC NLOCK
Press: Home button > Setup (wrench) button > Display button > Features tab
Console Setup
Display Features Advanced
General
Feature
Automatic Swath Control
Multiple Product
Norac UC5 Interface
Fan Frame - Feed Gate Control
ISOBUS Virtual Terminal
HARDI Sprayer
Norac UC5 can be used with or without an unlock but how you setup and run the system differs
depending on whether the system is locked or unlocked and using CAN A or CAN B.
CAN A
CAN B
See
"Virtual Terminal" on page 89
C C
REATE ONFIGURATION
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > Add
(+) button > Application button
A wizard will guide you through the process of selecting or creating a vehicle, implement and controllers.
Your Operating Configuration will then be viewable when you start a new Field Operation with the Field
Operation Wizard. For more information:
Ag Leader PN 4002083 Rev. N
Status
Feature Description:
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Unlock
No Functionality
Setup using Virtual Terminal Screens
Operate using Virtual Terminal Screens
for more information on using Virtual Terminal.
Configuration
See "Create Configuration" on page 223.
Features
The Features Tab is where you can enter unlock
codes. Unlock codes are unique to the serial number
of each display and the feature registration number.
You must supply these numbers to your dealer when
purchasing any unlock codes. Press
the unlock code and press
feature.
Locked
Operate using Ag Leader Run Screens
A
PPLICATION
to enable the
UnLocked
Setup using Ag Leader Menus
Setup using Virtual Terminal Screens
Operate using Ag Leader Screens
Application
to enter
287