Ag Leader Integra Display Operator's Manual page 316

A new product can be set up at this time by pressing
Press to add selected product or p
a product.
6. Press to add an additional component.
7. When all components have been added press
8. Enter Manufacturer name if applicable.
- Manufacturer name can be added to the drop-down menu by pressing
9. Press to enter a unique name for the blend.
Press to complete the process of setting up the dry blend or p
Configuration Setup screen without adding a mix.
Created blend should appear under the Application heading located on the Product tab of the Configuration
Setup screen.
Represents Dry Blend prior to display firmware version 5.4 and mixes exported from SMS. Cannot be
edited by user.
New Dry Blend/Product Template created beginning with display firmware 5.4. Can be edited by
user.
L C
OAD ONFIGURATION
1. Press: Select Event button.
300
ress
Select Event
and following the Product Setup Wizard.
to return to Add Mix/Blend screen without adding
.
ress
Select a Season, Grower, Farm, and
Field on the Management Selection
screen. For more information, see
"Setup Event" on page 45
to return to
.
Firmware Version 6.0