Save - Ag Leader Integra Display Operator's Manual

The Pattern Cycle Button allows the user to easily cycle between patterns with a
Straight
single button press. Patterns will cycle in the order they were created or added,
Reset
starting back at the beginning of the list, once the last patterns is reached.
2.0
Total: 0.0
Group Pattern Settings
Guidance Width Implement Width: 30.0000
30.000
Description
2014-01-07_10:04:39
Straight
2014-01-07_10:06:28
Straight
2014-01-07_10:12:42
Curve
2014-01-07_10:06:28
Straight
G
UIDANCE
S
AVE
Press: Map button > Guidance tab (in Mapping Toolbox) > Setup (wrench) button > Save button
Save Pattern
Enter New Description:
Existing Patterns
Out
Planting2
Path 1
1
136
Shift
0
0
Identical
0
0
O
PTIONS

Save

Created
Swath Pattern
60.000 12/23/2009 Straight
12/23/2009
60.000 Straight
60.000 12/23/2009 Straight
60.000 12/23/2009 Straight
When loading a Pattern Group, the Group Pattern
Setting dialog appears and allows the user to select
the Guidance Width and any Shift that needs to be
applied to each Pattern within the Pattern Group.
User will also have the option to load Curve Patterns
as Adaptive or Identical.
Straight AB, Identical Curve, Adaptive Curve and
Pivot Patterns can be grouped. SmartPath cannot
be grouped.
This allows you can save a pattern (.AGSETUP file)
to the display's internal memory to the current field.
Press and enter a unique pattern name.
When finished, press .
Firmware Version 6.0