Status Screen - Ag Leader Integra Display Operator's Manual

S S
TATUS CREEN
The target rate is not available for edit from the VT screen. Target rate can only be adjusted
Note:
from the Run Screen.
264
Serial Connection Status – Indicates if the ISOBUS Serial Application Rate
module is communicating with the connected controller.
Target Rate Status – Indicates the target rate sent to the connected controller.
Actual Rate Status – Indicates the actual rate received from the connected
controller.
The status screen provides the user with
readout of the connected controller's
target rate, actual rate, section status,
and connection status.
Boom Section Status – Indicates the on/off status of the
boom sections sent to the connected controller.
Firmware Version 6.0