Unlocking Features; Advanced Tab - Ag Leader Integra Display Operator's Manual

Unlocking Features

Console Setup
Features
General Display Advanced
Feature
Automatic Swath Control
Multiple Product
Norac UC5 Interface
Fan Frame - Feed Gate Control
ISOBUS Virtual Terminal
HARDI Sprayer
Note: Once a feature is unlocked, that feature remains with that display and cannot be transferred to another.
A
DVANCED TAB
Press: Home button > Setup (wrench) button > Display button > Advanced tab
Console Setup
Advanced
General Display Features
Key Switch Standby Log Files
(minutes)
Export by Grower
5
Export data files
on shutdown
Export All
Log Files
Export
Diagnostic Files
View Module
About
Firmware
CAUTION: The Export Diagnostic Files, Advanced Parameters, Copy Debug Files, Clear Debug Files
and Service Mode functionality on the Advanced Tab is reserved for use by the manufacturer. DO NOT
change any of these settings without specific instruction from the manufacturer.
• Key Switch Standby
This setting allows the display to remain powered up after the vehicle power has been shut down. Instead,
the display will switch into standby mode and will appear to be shut off; however the power light will change
to an amber color. Pressing the touchscreen while it is in standby mode will immediately turn the screen
back on again.
Ag Leader PN 4002083 Rev. N
Status
Feature Description:
Enabled
Enabled
Enabled
Enabled
Enabled
Off
Unlock
Memory Guidance
Create Copy
Backup Debug Files
Restore Clear
Backup
Debug Files
Clear Internal Remove
Memory Patterns
Advanced Memory Service
Parameters Test Mode
The Features Tab is where you can enter unlock
codes. Unlock codes are unique to the serial number
of each display and the feature registration number.
You must supply these numbers to your dealer when
purchasing any unlock codes. Press
the unlock code and press
feature.
Advanced
The Advanced Tab allows you to specify settings for
copying log files; specify Key Switch Standby
settings; view and manually upgrade module
firmware; and create and restore backup files.
S
ETUP
to enter
to enable the
19