Planting Settings; Application Settings; Grain Harvest Settings - Ag Leader Integra Display Operator's Manual

Planting Settings

• Edit Info button
Press to edit the following information for the highlighted product in the Product List.
- Manufacturer
• Edit Legend button
Press to change the legend settings listed below.
- Average
- Range Spacing
- Color Scheme
- Ranges
- Reset to Default Legend
For more information, see

Application Settings

• Edit Info button
Press to edit the following information for the highlighted product in the Product List.
- Product Units
- Manufacturer
- EPA Number
- check box for restricted use pesticides
• Edit Legend button
Press to change the legend settings listed below.
- Average
- Range Spacing
- Color Scheme
- Ranges
- Reset to Default Legend
For more information, see

Grain Harvest Settings

• Crop Settings
Press the Edit button to open the Grain Settings screen where you can adjust the following settings:
The percentage of grain moisture used to calculate Dry Bushels
- Dry%
- Weight to Volume
- Expand bushels for all grains below dry%
percentage, the display increases weight to show the weight which would be shown if the
crop equaled or exceeded the dry percentage.
• Legend Settings
Choose Yield or Moisture from drop down box.
Press Edit Legend to change the settings listed below.
- Average
- Range Spacing
- Color Scheme
- Ranges
- Reset to Default Legend
Ag Leader PN 4002083 Rev. N
"Legend Settings" on page 52
"Legend Settings" on page 52
The Weight to Volume conversion number used to calculate bushels.
.
.
If the moisture of the harvested crop is below the dry
S
ETUP
23