Actuator/Clutch Logic - Ag Leader Integra Display Operator's Manual

Actuator/Clutch Logic

Determines Actuator/Clutch Behavior on Zero Rate
Control Valve Configuration
Single Bin Actuator
Multiple Bin Actuator,
Main Only
Multiple Bin Actuator,
Main + Channel
Fertilizer Blend Setup
Dry fertilizer blends are set up by using the on-screen Dry Fertilizer Blend wizard described in the
following steps. A dry blend can contain up to seven individual components. To create a Dry Fertilizer
Blend, go to the Setup Product Tab, and press
Product Mix Setup Wizard: Step 1 of 4
Select Tank Mix or Dry Blend
Dry Blend
Note: The Base Amount is the total weight of product for the fertilizer blend. The Base Amount does not need
to match the actual volume of product that will be applied, but is used only to establish the ratio of all products
to the total volume.
Ag Leader PN 4002083 Rev. N
Control Component State
Control Channel RPM
Commanded to Zero Other than
by Master Switch Off
Main Clutch Output = Off
Channel Clutch Output = Off
Linear Actuator = Hold
Main Clutch Output = On
Channel Clutch Output = Off
Linear Actuator = Close
Main Clutch Output = On
Channel Clutch Output = Off
Linear Actuator = Hold
.
At the Choose Product Type screen, press the
Mix/Blend button. The Product Mix Setup Wizard
appears.
1. Use the drop-down menu to select Dry Blend.
2. Press
3. Enter a Base Amount of product and the
controlling Units for the dry product blend.
4. Press
A
PPLICATION
Master Switch Off
Main Clutch Output = Off
Channel Clutch Output = Off
Linear Actuator = Hold
Main Clutch Output = Off
Channel Clutch Output = Off
Linear Actuator = Hold
Main Clutch Output = Off
Channel Clutch Output = Off
Linear Actuator = Hold
to continue.
to continue.
323