Implement Offsets - Ag Leader Integra Display Operator's Manual

16. Enter Hitch Point Offsets
Press check box if implement provides a hitch point. Press
menu to enter "to the left" or "to the right". Press
to continue.
17. Enter Implement Name
Press to enter a name for the implement. Press
18. Select Implement.
Press to continue.
19. Select Second Implement.
Use drop-down menu to select Implement or press
20. Select Speed Source
Use drop-down menu to select Primary Source, set Backup Source, and configure Auxiliary Channel.
Press Calibrate Speed Sensor to launch the Speed Sensor Calibration Wizard.
21. Enter Configuration Name
A suggested name for the configuration appears. If desired, Press
Press when complete.
The complete configuration should now appear under the Application heading located on the
Configuration tab of the Configuration Setup screen.
The Operating Configuration is now able to be selected when starting a new Field Operation with the
Field Operation Wizard. For more information, see
I O
MPLEMENT FFSETS
Offsets
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > your
specific configuration > Setup (wrench) button >Offsets button
Ag Leader PN 4002083 Rev. N
to enter distance Forward or Backward. Press
to continue.
to add second implement.
"Setup Event" on page 45
Select Your Specific
Configuration
Configuration
A
PPLICATION
to enter distance and drop-down
to enter a different name.
.
225