Ag Leader Integra Display Operator's Manual page 298

Note: In order to create an accurate Reference Strip, record for at least 300 seconds (5 minutes) in Corn and
North American Wheat and 150 seconds (2.5 minutes) in Europe.
0.49
ac
30% UAN
Rate
205 +
185 - 205
165 - 185
145 - 165
0 - 145
OptRx
Target Rate
N (lb/ac)
50
Average VI
0.649
Reference Strip Select Dialog
Current File Name: 2010-04-20_1516.rfs
Current Strip Name: East Field
File Name
2010-04-19_1009.rfs
Mon Apr 19 10:09:28 2012
Tue Apr 20 15:16:56 2012
2010-04-20_1516.rfs
Field Name:
Crop Growth Stage:
Crop Variety:
Note: To delete a reference strip, highlight the file name and press Delete.
C S
ROP ENSOR
Note: All units represent pounds (kilograms) of nitrogen.
282
30% UAN
gal/ac
15.00
15.00
N
5.000
5.000
VI MAP
Create
Delete
Sensor Rx:
Strip Name:
VI Reference Value:
S
ETTINGS
5. File Name
5.0
mph
Press the Stop button when you wish to
1
15
finish creating the Reference Strip. The
2
Reference Strip Information screen
10
lb/ac
appears, showing the new Reference Strip
file name. Press
12.0 gal/min
Flow:
Container: 793 gal
6. OptRx Sensors Apply Variable Rate
The OptRx sensors apply variable rate N,
80 ft 0 in 100%
based on data received from the sensors.
This variable rate appears in the Product
Control Toolbox (A).
Reference Strip
View All Create
7. (OPTIONAL) View Reference Strip
If desired, you may review this reference strip by pressing
the View All button, located on the bottom right-hand side
of the Map screen's Equipment Tab. The file name of the
new reference strip appears in the Reference Strip
Selection screen.
to accept, or press
to edit, if necessary.
Firmware Version 6.0