Configuration Setup - Ag Leader Integra Display Operator's Manual

C
ONFIGURATION
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > your
specific configuration > Setup (wrench) button

Configuration Setup

Vehicle
1 2
JD 4630
Vehicle
Offsets
Implement: JD 4630
Full Swath:
Sections:
Speed
Input
Crop
Auxiliary
Sensor
Input
Norac
Automatic
UC5
Swath Control
Offsets
Equipment
Settings
Configuration Settings:
• Adjust Implement Switch Settings (for area logging)
If using an implement switch in a area logging planting operation, adjust the Implement Switch Settings. For
more information, see
• Adjust Equipment Settings (for Rate Control)
DirectCommand configurations should adjust settings at the Equipment Configuration Settings screen. For
more information, see
• Speed Input Setup
For more information, see
Ag Leader PN 4002083 Rev. N
S
ETUP
Configuration
Controller: DirectLiquid
80 ft Serial Number: 2003750001
Device: DirectCommand
5
Type: Liquid
Flow Meter Cal (pls/gal)
inf
Calibrate
Pressure
Controller
Settings
"Equipment Settings" on page 79
"Equipment Settings" on page 79
"Speed Input Settings" on page 80
Press the Volume to Calculate button
and input the total volume.
Table will give user the amount of each
product to put in the tank.
Select Your Specific
Configuration
The Configuration Setup screen appears. Screen
will vary depending on configuration. Process may
include the following tasks:
.
.
.
A
PPLICATION
233