Tillage; Run Time Environment: Map Screen; Create A Tillage Configuration; Create A Configuration - Ag Leader EDGE User Manual

T
ILLAGE
T
ILLAGE
R T E
UN IME
The screen shown is for a Tillage configuration. In order for you to view the Map screen, you must first
set up a Grower, Farm and Field at the Start Field Operation portion of the Home screen.
For more information, see
View button appears at the bottom of the Home screen.
Press the Map View button, and the map screen appears, as shown.
Note: Pressing the Map View button will cycle between the available map screen views, and the appearance
of the Map View button changes. For information on Map Screen items that are standard for all operations,
see "Run Time Environment: Map Screen" on page 18.
C T
REATE A
To set up a Tillage configuration, you must first set up Vehicle and Implement with the following
procedures.

Create a Configuration

1. At the Setup screen, press the Tillage icon.
NVIRONMENT
"Management" on page 10
C
ILLAGE ONFIGURATION
2. The Tillage Configuration Tab opens.
: M S
AP CREEN
• (A) Total Field Acres
• (B) GPS Status
• (C) Map Options
• (D) Home button
• (E) Map View button
• (F) Vehicle icon
• (G) Implement icon
• (H) Logging Status button
• (I) Ground Speed
. Once a configuration has been completed, the Map
61