Setup Event - Ag Leader Integra Display Operator's Manual

S E
ETUP VENT
You must have already created the following:
• A Season, Grower, Farm and Field in Setup Management. For more information, see
button" on page 30.
• An Operating Configuration at the Setup screen's Configuration Tab. This Operating Configuration
consists of Equipment, Vehicle, Implement, Controller (optional), Container (in Application), and Ground
Speed Source.
• A Product (if you are creating an Application or Planting Field Operation) at the Setup Product Tab. For
more information, see
All of these are referenced by the Field Operation Wizard during the Field Operation setup process.
Select Event button opens the Field Operation Wizard where you can enter information relating to your
Growing Season, Grower, Farm, Field, Crop Type and Product. For more information, see
and also
on page 45 "Field Operation Options" on page 46
1. Grower, Farm and Field Selection
Enter a Growing Season, Grower, Farm, and Field by pressing
down menu, or by pressing
Use to select an operating configuration from the drop-down menu. For more informations on
Configuration Selection see
2. Product Selection
A planting or application configuration must include a product. Select product from the drop-down list or
press to create a new one. Press
Product Selection
DC COM10K
DL1
Crop Sensor
Boom Control
3. Region Options
Press to edit or change the region name from the system default if desired. At this screen, you can
also create a new region or change the controlling product.
Ag Leader PN 4002083 Rev. N
"Product tab" on page 22
Select Event
to create a new one.
"Configuration Selection" on page 25.
Active 28% UAN
Active
Select Product
Active
Active
.
Press the "Select Event" button
and follow the steps in the wizard.
.
to select existing ones from a drop-
to continue.
• If a configuration is loaded with undetected
modules, the Product Selection screen may show
some grayed out (unavailable) options. The
example to the left shows that the Direct
Command module is active but Direct Injection,
Crop Sensor, and Boom Control modules are
grayed out and not functional.
S
ETUP
"Management

"Setup Event"

45