Ag Leader Integra Display Operator's Manual page 358

M S : F
AP CREEN
R S
EGION ELECTION
Region:
<1>
Press: Home button > Region button
Options
<1>
Variety Tracking
Automatic Variety
Tracking
Automatic Region
Changing
Note: The Options screen also appears when you create a Field Configuration with the Field Operation
Wizard.
• For more information about Automatic Variety Tracking or Automatic Region Changing, see
Varieties and Changing Regions" on page 342.
T V
RACKING ARIETIES AND
You can use the Options screen to enable the display to track varieties that you planted earlier and are
now harvesting. You can also use two types of variety tracking: Automatic Variety Tracking and
Automatic Region Changing.
• Automatic Variety Tracking tracks only varieties; hence the operator must manually change to a new
region.
Note: You can select the Variety Tracking option when you are creating a crop during Harvest Product Setup.
• Automatic Region Changing tracks both varieties and regions, so the display changes the region
automatically.
342
D
LOW ELAY
: O
PTIONS
--NONE--
Import Variety
Map
C
HANGING
When the Map screen is running in a Zoom Detail
view, instantaneous coverage (A) is shown
automatically. However, there is a time lag between
when grain enters the combine through the Header
and is logged by the Flow Sensor in the Clean Grain
Elevator. Because of this time lag, the instantaneous
coverage is shown on the Map screen as a lighter
color than coverage that has been logged (B) by the
display.
S
CREEN
The Region button, located on the Home screen,
opens the Options screen where you can change or
edit regions, select Automatic Variety Tracking or
Automatic Region Changing.
R
EGIONS
"Tracking
Firmware Version 6.0