Creating Products; Creating Single Products; Creating Product Template - Ag Leader Integra Display Operator's Manual

Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > your
specific configuration > Setup (wrench) button >Controller Settings button
Controller Settings screen appears, with each channel's settings shown on its own tab.
Note: Use the Manage Equipment button to view a list of specific vehicles and implements.
C P
REATING RODUCTS
Creating application products and product templates can be completed during initial setup or from the
Product Selection screen of the Field Operation Wizard when starting a field operation.

CREATING SINGLE PRODUCTS

To create a single product, to be added to a product template or to be applied by itself, use the on-
screen wizard described in the following steps.
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Product tab > Add (+)
button > Application Product button
1. Select Product Type
Use drop-down menu to select Product Type.
Press to continue.
2. Select Product Units
Press to continue.
3. Enter EPA Product Number (Optional)
Check box if product is a Restricted Use Pesticide
Press to continue.
4. Enter Manufacturer name if applicable.
- Manufacturer name can be added to the drop-down menu by pressing
5. Press to enter a unique name for the product.
Press to complete the process of setting up the product or p
Configuration Setup screen without adding a product.
Created product should appear under the Application heading located on the Product tab of the
Configuration Setup screen.

CREATING PRODUCT TEMPLATE

Product Templates are set up by using the on-screen wizard described in the following steps.
Note: Prior to making a new product template, it is recommended to add the individual products to the list
in the units recommended by the chemical label.
Ag Leader PN 4002083 Rev. N
Product
A
PPLICATION
Application
Product
ress to return to
227