Seed Tube Monitor Module; Configuration Setup - Ag Leader Integra Display Operator's Manual

P
LANTING
S T
EED
C
ONFIGURATION
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > your
specific configuration > Setup (wrench) button
Note: Use the Manage Equipment button to view a list of specific vehicles and implements.

Configuration Setup

Vehicle
1
New Holland T900
New Holland T900, 12 row planter, SeedCommand
GPS
Implement: 12 row planter
Offsets
Full Swath:
Rows:
Sections:
Speed
Attachment:
Input
Auxiliary
Input
Implement
Automatic
Offsets
Swath Control
Row
Equipment
Shutoff
Settings
2. Speed Input Setup
For more information, see
3. Calibrate Distance
For more information, see
4. AutoSwath Settings (if using AutoSwath)
For more information, see
5. GPS Offsets
Adjust GPS offsets for the Antenna Tab and the Hitch Tab. For more information, see
.
page 85
6. Swath Section Offsets
For more information, see
• For information on the Auxiliary Input Settings (Switch Mapping) feature, see
Ag Leader PN 4002083 Rev. N
M
UBE ONITOR
S
ETUP
Configuration
Controller: SeedCommand
30 ft
Serial Number: 2003810001
12 Device: SeedCommand
3
Rear Drawbar
Seed
Monitor
Controller
Settings
"Speed Input Settings" on page 80
"Calibrate Distance" on page 81
"AutoSwath" on page 165.
"Swath Section Offsets" on page 86
M
Select Your Specific
Configuration
The Configuration Setup screen appears. Screen will
vary depending on the particular operating
configuration. Process may include the following
tasks:
1. Equipment Settings
- Adjust Equipment Settings (for Rate Control).
SeedCommand configurations should adjust settings at the
Equipment Configuration Settings screen. For more
information, see "Equipment Settings" on page
.
.
.
P
LANTING
ODULE
79.
"Vehicle Offsets" on
"Auxiliary Input" on page 82
.
195