Table of Contents
Advertisement
Radio Baud Rate
RTK Settings - NTRIP
Differential Source
RTK
Press: Home button > Setup (wrench) button > GPS button > Serial (from Receiver drop-down box) >
Receiver Setup (wrench) button > General tab > RTK (from Differential Correction drop-down box) >
Differential Source Setup (wrench) button
NTRIP
Server
165.206.203.10:10000
Username
agleader11
Password
******
Cellular
IP Address:
10.44.64.32
Modern Status:
Connected
Ag Leader PN 4002083 Rev. N
Radio Settings
38400
Reciever: GPS 6500
Serial
RTK Settings
Streams
RTCM_NEAR - Connected
RTCM3_MAX
RTCM_IMAX
RTCM2_IMAX
RTCM2_NEAR
CMR_NEAR
CMRP_NEAR
Setting the differential source to RTK
External enables GGA NMEA message
output on Port B at 1 Herz (Hz).
NTRIP
• Server
• Username
Disconnect
• Password
Info
• Steams
• Disconnect/Connect - to the NTRIP
Network
• Info - see
Cellular
• IP Address - indicates a connection to
the Internet
• Modem Status
General
"Info button" on page 109
107
- Quick Links:
- Display
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Integra Display and is the answer not in the manual?
Questions and answers
When planting with row shutoffs, and I start overlapping, my rows start to shutoff. When this happens the screen starts to alert and then throws up a check mark that I have to hit each time that I have to hit to get back to my mapping page. Is there away I can do away with this process and just have it alert me that the rows are shutting off