Pause Boundary; Headlands; Active Area - Ag Leader Integra Display Operator's Manual

5. During the creation of a boundary, the Pause/Resume button and Stop button
Field
appear at the top of the Field tab.
6. Press the Stop button to complete the boundary. At the Boundary screen, choose
whether to Save, Resume or Discard the boundary.

Headlands

Pause Boundary

Topography
When creating a boundary, you can use the Pause Boundary button to create a
straight line between two points. To do this, drive the vehicle to a point, press the
Pause Boundary button, then drive to the second point. When you press the
Resume Boundary button, a straight line is created between your current point and
your pause location.
H
EADLANDS
Press the Headlands button on the Field tab to access the Headland Options
Field
screen.
Boundary
Headlands
A Field Boundary is required to create a headland.
Topography
Headlands Options
Enable Headlands

Active Area

All
Active Area
Product will
be applied to
main section
of field.
Work Area
AutoSwath
will turn off
product on
headlands.
56
Enable Headlands - use checkbox to turn
Headlands functionality on and off
Product will
be applied to
headlands of
field.
Headlands
AutoSwath
will turn off
product on
main section
of field.
Add Headland
Load a Headland
Edit Headland
Alarm Settings
AutoSwath
will not be
affected by
headlands.
Firmware Version 6.0
All