RIP information
rip is turning on
default metric 16
neighbour is
preference is 100
Displayed information
rip is turning on
default metric 16
neighbour is
preference is 100
15.3.2.2.22
debug ip rip packet
Command: debug ip rip packet
no debug ip rip packet
Function: Enable the RIP packet debug function for sending/receiving: the "no debug IP
packet" command disables this debug function.
Default: Debug is disabled by default.
Command mode: Admin Mode
Example:
Switch#debug ip rip pa
"debug ip rip pa" executed successfully.
00: 04: 20:
start at 260*********************
send packets to
packet header: cmd: response, version: 1
no.
dest
1:
159.226.0.0
00: 04: 20:
start at 260*********************
send packets to 159.226.255.255
packet header: cmd: response, version: 1
no.
dest
1:
159.222.0.0
11.11.11.2
dest_mask
0.0.0.0
dest_mask
0.0.0.0
383
Explanation
RIP routing is enabled
The default metric for introduced route is
16.
The specified destination address.
RIP routing priority is 100.
gatedway metric
0.0.0.0
1
gatedway metric
0.0.0.0
2