Show Mls Qos Interface - Accton Technology ES4626 Management Manual

Usage Guide: This command indicates whether QoS is enabled or not.
Example:
Switch #show mls-qos
Qos is enabled
Displayed information
Qos is enabled
13.1.4.1.2 show mls qos aggregate-policer
Command: show mls qos aggregate-policer [<aggregate-policer-name>]
Function: Display policy set configuration information for QoS.
Parameter: <aggregate-policer-name> is the policy set name.
Default: N/A.
Command mode: Admin Mode
Example:
Switch #show mls qos aggregate-policer policer1
aggregate-policer policer1 80000 80 exceed-action drop
Not used by any policy map
Displayed information
aggregate-policer
exceed-action drop
Not used by any policy map
13.1.4.1.3

show mls qos interface

Command: show mls qos interface [<interface-id>] [buffers | policers | queueing |
statistics]
Function: Display QoS configuration information on a port.
Parameter: <interface-id> is the port ID; buffers is the queue buffer setting on the port;
policers is the policy setting on the port; queuing is the queue setting for the
port; statistics is the number of packets allowed to pass for in-profile and
out-of-profile traffic according to the policy bound to the port.
Default: N/A.
Command mode: Admin Mode
Usage Guide: Statistics are available only when ingress policy is configured.
Explanation
QoS is enabled.
policer1 80000 80
328
Explanation
Configuration for this policy set.
Time of this policy set being
referred to .