5.3 CONNECTING THE PRINTER TO THE PC
5.3.1 System requirements
To use the printer with RIP software, you need the following minimum requirements.
System OS
Windows 2000 Professional
CPU
Pentium III 1 GHz or higher
Memory (RAM)
512 MB or more
Hard disk space
10 GB or more
Notes
•
T
HE MEMORY REQUIREMENTS MAY VARY DEPENDING ON THE TYPE OF APPLICATIONS YOU ARE USING AND THE
COMPLEXITY OF THE FILES YOU WANT TO PRINT
•
P
LEASE ALSO REFER TO THE RECOMMENDATION MADE BY THE MANUFACTURER OF THE
.
HAVE SELECTED
5.3.2 Selecting cables
This printer is compatible with following interfaces:
Centronics interface
Network interface
The following cables are necessary to connect your printer to the computer. Prepare appropriate cables
according to the computer to be connected.
Centronics interface: Centronics interface cable
Network interface: 10BASE-T/100BASE-TX Ethernet cable that is compatible with both.
(Category 5)
Notes
•
S
EE BELOW FOR THE CONNECTION PROCEDURE
R
'C
EFER TO
ONNECTING THE
o
R
'C
EFER TO
ONNECTING THE NETWORK INTERFACE
o
•
R
"I
EFER TO
NTERFACE
.
.
C
ENTRONICS INTERFACE
S
"
PECIFICATIONS
FOR THE CONNECTION PROCEDURE
CS9200 Low Solvent series printers
'
'
.
36
RIP
SOFTWARE YOU
AP-40301 – Rev. 2.0 – 02/05/2008