Connecting The Printer To Your Pc; System Requirements; Selecting Cables - Oce CS9090 User Manual

4.8 CONNECTING THE PRINTER TO YOUR PC

4.8.1 System requirements

To use your printer with the driver, you need a PC that complies with the following system requirements :
System OS Windows 2000 Professional
CPU Pentium III 1 GHz or higher
Memory (RAM) 512 MB or more
Hard disk space 10 GB or more
Notes
•
The memory requirements may vary depending on the type of applications you are using and the
complexity of the document you want to print.
•
Océ recommends you to use a hard disk memory RAM as large as possible.
•
Please also refer to the recommendation made by the manufacturer of the RIP software you have
selected.

4.8.2 Selecting cables

This printer is compatible with following interfaces:
Centronics interface
Network interface
The following cables are necessary to connect your printer to the computer. Prepare appropriate cables
according to the computer to be connected.
Centronics interface: Centronics interface cable
Network interface: 10BASE-T/100BASE-TX Ethernet cable that is compatible with both.
(Category 5)
Notes
•
See below for the connection procedure.
Refer to 'Connecting the Centronics interface'
o
Refer to 'Connecting the network interface'
o
•
Refer to "Interface Specifications" for the connection procedure.
AP-75036 - Revision 1.3 – 20/03/06 65
Chapter 4: Preparing for a job
User's Guide CS9000 series