Loading Roll Media; Installing The Media Roll - Oce CS9090 User Manual

Chapter 4: Preparing for a job

4.6.2 Loading roll media

4.6.2.1

Installing the media roll

Determine the printable side of the media roll (inside or outside printing) and lay down the media
Step 1 :
roll as shown in the images below.
Position the media roll in the middle of the printing space. Use the numbers indicated on the roll
Step 2 :
unit bar to position the media roll. (See image below)
Position the roll units of the unwinder in such a way that the media roll can be placed in between.
Step 3 :
AP-75036 - Revision 1.3 – 20/03/06
1 = Media roll
2 = Numbers on the roll unit bar
1 = Roll unit handle
2 = Roll unit
3 = Media roll
54 User's Guide CS9000 series