7.1 LOADING ROLL MEDIA
Please refer to the User's Guide of the Unwinder/Winder 100 to know how to load roll media properly.
7.2 LOADING SHEET MEDIA
To load sheet media, follow the steps below.
Step 1 :
Power ON the printer.
Step 2 :
Unload media if necessary.
Step 3 :
Be sure that the pressure rollers are raised before loading sheet media.
Step 4 :
When no media is loaded and ...
... the pressure rollers are raised, the following message will be displayed.
... the pressure rollers are lowered, the following message will be displayed.
Step 5 :
Open the front cover.
Step 6 :
Load a sheet of media at the right side of the printer. Position the media next to the media setting
position (line of little holes in the media guide platform). The maximum distance between the
guideline and media is 5 mm.
Machine
CS9265
CS9290
Minimum Media Width
A4 (210 mm – 8,27")
A4 (210 mm – 8,27")
47
CS9200 Low Solvent series printers
7 LOADING MEDIA
Maximum Media Width
1651 mm (65.00")
2240 mm (88.18")
AP-40301 – Rev. 2.0 – 02/05/2008
Printing Width
1640 mm (64.56")
2230 mm (87.79')