Loading roll media
To load roll media
Slide the rolled media onto the media (upper) roller, feeding in the paper as
1
shown.
Slide the media guide into the roll core, and tighten the guide to secure the roll
2
by turning the knob clockwise.
Standing behind the printer, insert the media's leading edge into the back of the
3
printer. The printer automatically detects the presence of the media and
advances it.
Press
4
Load Media
[3] Loading media
Using the take-up roll
The take-up roll facilitates unattended print jobs by automatically winding
printed media onto a core. In this mode, the automatic cutter is disabled. When
using this option, be sure that the media sensor on the printer's right leg is not
blocked.
To install the take-up roll
Install an empty core onto the take-up guides. Be sure that the core width
1
matches the width of the media you are using.
Slide the roll guide onto the media core, and secure it by tightening the locking
2
mechanism. If you moved the sensor mounting bracket before loading the roll
media, be sure to return it to its normal position.
Getting started
to move the media into printing position.
21