Before Using; Turning The Power On/Off; Turning The Power On; Turning The Power Off - Oce Eco Solvent CS9350 Manual

CS9350 User's Guide
Chapter 3
3.1

Turning the power ON/OFF

3.1.1

Turning the power ON

Step 1: Press the [Power] key on the operation panel to turn ON the printer.
• Power lamp on the operation panel turns on (blue).
• The printer starts initial operation.
• When the initial operation is complete, the printer enters Normal.
NOTE
If there is a problem during the initial operation, a message is displayed on the operation

panel and the printer may stop operating.
If operation stops, refer to "7 Troubleshooting" and deal with the problem.
3.1.2

Turning the power OFF

Step 1:
Verify the following regarding the operational condition of the product.
Printing or other operations are not in progress.

The operation panel display is Normal.

The Low lamp on the operation panel lights up in green.

NOTE
If the High lamp on the operation panel lights up in green, the head height is set to High.

Return the head height to Low before turning the power OFF.
4.2.5.2 When returning the print head to the original position

Before using

3-27