Turning The Power On/Off; Turning The Power On - Oce CS9090 User Manual

4.4 TURNING THE POWER ON/OFF

The method to turn the power ON or OFF is described below.
Caution
Before powering ON the unit, make sure the waste bottle is installed.

4.4.1 Turning the power ON

Turn the power of the unit ON according to following procedure.
Press the [POWER] key of the operation panel, to turn the unit ON.
Step 1 :
The POWER lamp of the operation panel will light (green).
The unit will start initial start-up operations.
Step 2 :
After finishing initial start-up operations, the unit will enter the normal operating condition.
Step 3 :
Notes
If there are any problems during the initial start-up operation, the unit will display a message on the
operation panel, and the operation may stop. If the operation stops, refer to "Troubleshooting", and take
the appropriate actions.
AP-75036 - Revision 1.3 – 20/03/06 45
Chapter 4: Preparing for a job
User's Guide CS9000 series