Turning the printer on or off
Once the printer has been turned on, it is ready for operation.
Turning the printer on
Set the on/off switch, located at the back of the printer, to position '1' (see
1
figure 2). If the electrical supply is correctly connected, the green switch will
light up.
[2] Printer on/off switch
When 'Ready' appears on the operating panel, the printer is ready for
Note:
use.
Turning the printer off
Set the on/off switch, located at the back of the printer, to position '0' (see
2
figure 2).
Attention:
information or a paper jam.
12
Océ 9300 User Manual
Turning the printer off during a print job may cause a loss of