Table of Contents
Advertisement
Caution
W
HEN ASSEMBLING THIS PRODUCT
4.1 ASSEMBLING THE STAND
Assemble the stand according to the following procedure.
Step 1 :
Unpack the stand assembly as described in chapter 3.
Step 2 :
Turn the stand upside down.
Step 3 :
Mount each foot to the stand.
Pay attention to the following:
1. Use each time (8x) a hexagon screw (M6x30) + spring washer (M6) + plain washer (M6).
2. Be sure that the feet are mounted correctly, with the screw holes pointing to the inside.
4 ASSEMBLING THE UNIT
,
ALWAYS WORK WITH AT LEAST
25
CS9200 Low Solvent series printers
4
PEOPLE OR MORE
AP-40301 – Rev. 2.0 – 02/05/2008
Advertisement
Table of Contents
