Check the status of the RIP unit
The PRISMAsync Print Server consists of a main controller, two standard RIP units and optional
two additional RIP units. The RIP units are responsible for the raster image processing. (
status of the RIP unit on page
When one or more RIP units do not communicate with the main controller, the orange RIP
symbol appears in the warning area of the dashboard.
The dashboard shows if RIP units do not communicate with the main controller.
You can hide the warning of the RIP unit that is not responding.
[338] Status of the RIP units
1. Touch [System]→[Controller].
2. Check which RIP unit does not respond.
RIP unit does not respond.
RIP unit responds.
3. Touch [Hide].
351)
Check the status of the RIP unit
Check the
Chapter 13 - Solve problems
351