Replacing The Sponge In The Spitting Box - Oce CS9090 User Manual

7.2.3.3

Replacing the sponge in the spitting box.

Notes
Use gloves and tweezers to change the absorbent in the flushing box.
Unlock the head
Step 1 :
Notes
Following display will appear.
After job is done, press the ENTER key, and the head will lock again.
The carriage moves to the waiting position for replacing the flushing sponge.
Step 2 :
Remove the old absorbents with tweezers.
Step 3 :
Install the new absorbents in the flushing box. Make sure that the 2 holes are on the right side of
Step 4 :
the flushing box and that the pins of the black box are in the holes of the absorbent.
Lock the head.
Step 5 :
AP-75036 - Revision 1.3 – 20/03/06
1 Sponge (29801281)
2 Tweezers
3 Gloves
1 Two holes
2 Pin of black box
157
Chapter 7: Maintenance
User's Guide CS9000 series