5.1.3 Monthly maintenance
5.1.3.1
Replacing the spitting box sponges
Notes
•
In case your printer is currently loaded with Eco-Solvent ink, we advise to replace the spitting
box sponges every two months.
•
Make sure to install the correct spitting box sponges in case your printer is currently loaded
with Bio-Lactite ink.
Be sure to read and understand the safety warnings before handling the printer.
Replace the spitting-box sponges in the following situations.
•
When the spitting-box sponge becomes deformed.
•
When smears of ink appear on the media
•
1 month after replacement.
Notes
•
For types and details of the spitting-box sponge, contact your local Océ representative.
Step 1 :
If the printer is switched ON, make sure that:
•
Printing or other operations are not in progress.
•
The operation panel display is Normal.
Step 2 :
Open the front cover.
Step 3 :
Use forceps to remove the spitting-box sponges from each spitting box.
(2 at the left spitting box – 1 at the right spitting box)
1
Caution
•
Do not drop waste fluid when replacing the spitting-box sponges. If waste fluid comes into
contact with the grid roller, the surface of the grid roller will be damaged, and the media feed
function will be affected.
Step 4 :
Install the new spitting-box sponge to each spitting box.
Step 5 :
Close the front cover.
•
Spitting-box sponge replacement is complete.
1
2
N°
Name
1
spitting boxes
2
spitting-box sponge
109
User's Guide Océ CS9160 printer
1
AP-40790 – Rev 2.0 -23/08/2011,