Spitting Menu - Oce Eco Solvent CS9350 Manual

5.1.2

Spitting menu

Sets up the spitting operation while printing.
NOTE
When Spitting is set to "Off", the nozzle will become easily clogged because spitting is

not performed. In this instance, print quality cannot be guaranteed.
When the spitting setting is "On Media", the maximum printable media width becomes

10mm shorter.
Therefore, the side margins become "value set on side margin menu" +5mm.
Depending on the setting, the right margin is a sum of the following.

"Y (print head transferring distance) of the Origin menu" + "5mm (when the spitting
setting is "On Media")" + "value set on side margin menu"
Note
1. Starting position
2. Media feed direction
X (media feeding distance)
Y (print head transferring distance)
a (0mm/5mm: The spitting setting is On, Off/On Media)
b (5mm to 25mm: Side margin setting amount)
5.1.3 Side Margin menu
5.1.8 Origin menu
1
b a Y
5-116
CS9350 OPERATION MANUAL
X
2
0