Environmental Operating Specifications; Shipping And Storage; Shock And Vibration - Oce LightJet 430 Site Preparation Manual

Table of Contents

Advertisement

LightJet 430 site preparation guide

Environmental Operating Specifications

Temperature: 19ºC to 28ºC (66ºF to 82ºF) within a 5ºC band
Relative humidity: 40% to 60%
Altitude: 0 to 2 286 meters (0 to 7 500 feet )

Shipping and Storage

These specifications apply to any LightJet
Temperature: -30ºC to +50ºC (-22ºF to +122ºF)
Relative humidity: 0% to 95%, non-condensing
Altitude: 0 to 10 668 meters (0 to 35 000 feet)
The machine should not be stored longer than 1 month in an environment with a relative
humidity greater than 60%.

Shock and Vibration

®
The LightJet
430 functions normally in a typical office or photolab environment. Vibrations
generated by office equipment such as photocopiers and film or paper processors will produce no
visible image artifacts.
Vibrations generated from machinery such as air compressors and pumps may affect image
quality and are not considered part of an acceptable operating environment. It may be necessary
to consult a third party to isolate the source of such vibrations.
It is recommended that the LightJet
floor is ideal) to minimize transmission of vibration and shock to the machine from other
equipment. A poorly supported floor may transmit shock loads to the machine from people or
equipment moving by. Covering high traffic walkways with thick foam underlay and carpet may
minimize such effects. In some cases, it may be necessary to consult a third party to recommend
building improvements to reduce the effects of shock and vibration.
Occasional shock and vibration generated from seismic activity or other sources, such as a train
going by on a nearby railway, are not considered part of a normal operating environment. The
printer, however, will withstand these influences with no permanent effects on operating
specifications. Printing may have to be suspended during such periods.
Packed in its crate, the LightJet
Severe shock, however, may damage the precision optical and mechanical components within the
machine. The shipping crate is fitted with shock watches that turn from white to red when their
2-10
see copyright, disclosure, use and duplication information on pg. iii
®
430 shipped and stored in its own crate.
®
430 be installed on a stiff, well supported floor (a concrete
®
430 can withstand normal vibrations from road or air travel.
45572-I

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lightjet 430rs

Table of Contents