Function Menu Map - Oce 750 User Manual

Key Operator Mode

Function Menu Map

FUNCTION MENU
[1] System initial setting
[4] E.C.M. Function
setting
[6] Paper type /
Special Size Set
[7] Panel contrast /
Key Sound Adj.
[8] Key operator
data setting
[9] Weekly timer
[10] Control panel adjustment
[11] Tray size setting
[12] Power save setting
[13] Memory switch
8-4 Key Operator Mode
SUB FUNCTION MENU AND SETTING OPTIONS
[1] Date&Time setting: [Present time; Setting time; Summer time
On/Off]
[2] Language select setting: [Japanese; English]
[1] E.C.M. data edit: [Change; Add; Delete]
[2] E.C.M. all count reset: [YES; NO]
[3] E.C.M. function setting: [ECM On; ECM Off; Immediately;
After job; Warning]
Paper type: [Blank; Normal; Thick 1; Thick 2; Recycle; Thin;
Color; TAB PAPER; Special; User; Fine; Seal]
Special size: [STD size; STD size (special); Non STD size;
Wide paper]
[Panel contrast; Backlight contrast; Buzzer volume regulation]
[Name; Key Operator Tel. No.]
[1] Weekly timer ON/OFF setting: [On; Off]
[2] Timer setting: [ON time; OFF time]
[3] Timer action ON/OFF setting: [ON; OFF]
[4] Lunch hour Off setting: [Valid; Invalid]
[5] Timer interrupt password setting: [4-digit password]
ATS/APS switch: [ON; OFF]
Tray priority: [Tray 1, Tray 2, Tray 3, LCT, Bypass]
Auto low power: [5, 10, 15, 30, 60, 90, 120, 240]
Auto shut off: [---, 30, 60, 90, 120, 240]
[9] Automatic tray switching
[23] Job offset operating
[24] Continuation print
[26] Key click sound
[27] 1 SHOT indication time
[28] Power save screen
[33] Arrow key change (Image Shift)
[37] Key click sound (No paper/JAM)
[41] Trimmer (STD/Non STD size) (No function)